Instruction manual

24
ORION LC Installation and Operations Manual
Examples:
<CTRL>+<SHIFT>+<I> Enter the command mode
<SHIFT>+<3>
Switch immediately to port 3
<M2S5>,<RETURN>
Switch the master to port 2 and the secondary
unit connected to the master’s port 2 to port 5
<3>,<RETURN>
Switch the secondary unit to port 3
(secondary unit is the active level selected)
<BACKSPACE>
Switch the secondary unit back to port 5
<M>
Select the master level
<SHIFT>+<5>
Switch (the master) immediately to port 5
<BACKSPACE>
Switch the master back to port 2
<ESC>
Exit command mode
Serial switching operation
The serial commands only apply to the unit the commands are sent to.
Secondary units can not be switched by serial commands sent to the master
unit. To switch a secondary unit using serial commands, the commands
must be sent to the secondary unit.
Refer to Appendix D for the list of serial commands.