Instruction manual

ORION LC Installation and Operations Manual

Keyboard commands can only be issued if the unit is in the “Command

Mode”. If the unit is not in the command mode, keyboard entries are sent to

the connected computer and not the Orion LC unit.

Keyboard commands shown with a “+” between the commands mean that

all keys are pressed simultaneously.

Keyboard commands shown with a “,” between the commands mean that all

keys are pressed in succession, one after the other.

The hotkey sequence to enter the command mode can be changed from the

default sequence of <Ctrl>+<Shift>+<I> to one of the following sequences.

To change the hotkey sequence, first enter the default command mode

sequence <Ctrl> + <Shift> + <I>. When in the command mode, enter

<Ctrl> + <Shift> + <C> , <x> , <Return> (Note: “+” and “,” entries)

x = the following initialization string for the command mode.

All three keyboard status lights will flash rapidly to show the unit is in the

command mode. Press Esc key to exit the command mode.

<x>

(1-9)

New command mode string

<Ctrl>+<Shift>+<I> (default)

2 <Scroll lock>,<Scroll lock> (pressed twice rapidly)

3 Left <Shift>,Left <Shift> (pressed twice rapidly)

4 Left <Ctrl>,Left <Ctrl> (pressed twice rapidly)

5 Left <Alt>,Left <Alt> (pressed twice rapidly)

6 Right <Alt>,Right <Alt> (pressed twice rapidly)

7 Left <Ctrl>+Right <Ctrl> (pressed simultaneously)

8 Left <Ctrl>+<Shift>+Right <Ctrl>+<Shift> (pressed simultaneously)

9 Left <Ctrl>+<Alt>+Right <Ctrl> (pressed simultaneously)

When the new command mode sequence string has been accepted, press

<Esc> to exit the command mode and return to normal operation.

All keyboard commands are entered by first entering the command mode

using either the default hotkey sequence or the user defined sequence.