Instruction manual

ORION LC Installation and Operations Manual
19
Dual Head KVM Switch Installation
The Dual Head configuration
allows you to connect 3 dual
video computers to the Orion
LC and display and control
each computer from a single
workstation.
To configure Orion LC for a
Dual Head KVM Switch, set the
dip switch 1 and 2 ON and
connect the CATx or fiber
cabling as shown.
Connect a DVII-MM, a USB Type
A to Type B, and optional serial
and audio cables to your computer
and to the corresponding ports on
the transmitter.
Connect the CATx or fiber cables
from the transmitters to the Orion
LC ports labeled “T”.
Connect two CATx or fiber cable
from the Orion LC ports labeled
“R” to the receiver.
Connect two DVI monitors, USB
keyboard and mouse, and optional
serial and audio devices to the
corresponding receiver ports.
Figure 14. Dual Head KVM Switch