Specifications

W W W . R O S E . C O M
Typical Application
Access your computers over CATx or Fiber cable
Overview The Orion x160 / x288 system
consists of the main unit, a transmitter unit for
each connected computer and a receiver unit for
each connected KVM workstation. The transmitter
and receiver units are available in several
models. These models are selected to match the
computer and KVM workstations configuration.
The transmitter and receiver units are connected
to the Orion x160 / x288 using CATx cable,
single-mode fiber cable, or multi-mode fiber
cable.
If a computer has a dual-head video card, the
dual video transmitter and receiver would be
used. USB 2.0 transparent, analog or digital
audio and serial configurations can also be
added. The Orion x160 / x288 provides a truly
flexible and scaleable addition to your system.
Installation The Orion x160 / x288 can easily
b
e installed to streamline and simplify your system
requirements. There is no need to configure the I/O
ports because the unit automatically determines if
the port is an input or an output. When a transmitter
or receiver is connected to the unit it will
automatically acquire the transmitter or receiver ID,
save the configuration information and automatically
allocate the required ports. You can mix or match
transmitters or receivers connections to the Orion
x160 / x288 using CATx or fiber cable.
Options – DVI-I input
USB 2.0 transparent
Serial
Analog Audio
Digital Audio
Specifications
W-17.3” / 440mm D-10.5” / 270mm
H-15.5” / 395mm
Resolution – 1920 x 1200 @ 60hz
Distance – CATx – 450’ (140m)
Multi-mode fiber (62.5µ) – 650’ (200m)
Multi-mode fiber (50µ) – 1,300’ (400m)
Multi-mode fiber (50µ OM3) – 3,300’ (1Km)
Single-mode fiber (9µ) – 33,000’ ( 10Km)
Interface – Input CATx or Fiber cable
Output CATx or Fiber cable
Connectors – RJ45 or LC Fiber
Control – On-screen display (at each KVM station)
(Web, FTP, Telnet, SMTP, Serial, IR)
Ports – 8 to 288 (Expandable in 8-port cards)
Power – 90-240 VAC internal (Optional redundant PSU)
Available transmitters and receivers
A- DVI-D, USB-HID
B- DVI-I , USB-HID
C- USB Transparent
D- USB-HID
E- Analog audio (bidi) + RS232
F- Digital audio (unidi)
G- Analog audio (bidi) +
RS232 + USB-HID
H- Digital audio (unidi) + USB-HID
I- Digital audio (bidi)
J- Digital audio + analog audio +
RS232
Cards insert into the chassis or rack. Optional cards must be
combined with a main card. Cable connectors can be for CAT5,
single-mode fiber or multi-mode fiber
Chassis – 2 boards - single p.s.u.
Chassis – 2 boards - redundant p.s.u.
Chassis – 4 boards – single p.s.u.
Chassis – 4 boards – redundant p.s.u.
Chassis – 6 boards
20-card rack
A B C D E F G H I J
호02 센 터 플 러 스 11포 구 문 래 동1가 39서 울 시 영 등
2984-73 26 02) : Fax [phone]) Tel :
.co.krnoisivraenaw.ww
.kr.conisioraevaE-mail : info@n