Instruction manual

QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL 25
Console
Video output / Keyboard / Multi-Monitor / EDID
Selecting “Console” from the main menu displays the options for the video output, keyboard,
Multi-monitor, and EDID.
Use Up / Down arrow keys to show
additional modes
Setting the video output
to “auto” the QuadraVista
will read the connected
monitor’s configuration
data and set the mode,
resolution, and frequency
based on the monitors
DDC table. Use the up /
down arrow keys to
manually select a
specific mode, resolution,
and frequency. The new
setting will display for 10
seconds. Within this
time, press Enter / select
to accept the new video
output setting. No
change is executed if
enter is not pressed
within the 10 second
period. See Appendix D
for a list of supported
video modes