Instruction manual

Orion Installation and Operations Manual

Configure user

To configure the users of the Orion switch, select the option “User” in the “Configuration” menu by using the cursor

buttons and press enter.  The “User” mask will display full screen as shown in figure 9.

In this menu, you can setup user names and privileges.

Figure 9. Configure User menu

Field Type Description

Name CHR16 User Name (case-sensitive)

Password CHR16 User Password (case-sensitive)

HTP Y/N User may login and access via HTTP

FTP Y/N User may login and access via FTP

PPP Y/N User may login and access via ‚Internet’ (not available)

TEL Y/N User may login and access via Telnet

POW Y/N User is ‚Power-User’ and may activate e.g. the CrossPoint Mode

ADM Y/N User is Administrator and may change the configuration or

activate the CrossPoint Mode