Instruction manual

Orion Installation and Operations Manual
11
Access Options
Field Selection Description
Enable Login Y/N
Y – Login required to access the OSD with user name and password. After login,
the user will remain logged in until he explicitly logs out or an Auto Logout
has been performed. KVM Switching with Hot Keys requires the user to be
logged in.
N – No Login required.
User Matrix Y/N
Y – User access restricted to CPU’s explicitly unlocked in the User
Matrix. User matrix mode requires user login and implies
“Enable Login“ = “Y“. KVM Switching with Hot Keys requires the user to
be logged in.
N – User Matrix disabled.
CON Matrix. Y/N
Y – CON Port connectivity restricted to CPU’s explicitly unlocked in
the CON Matrix
N – CON Matrix disabled
Auto
Disconnect
Y/N
Y – Only active if “Enable Login“ or “„User Matrix“ are activated:
CON Port is disconnected from current CPU Port upon entering
into the OSD.
N – Current Connection is held
Timeout sec
### – Time of inactivity, after which OSD is closed automatically.
0 sec – No Timeout.
Auto Logout min
### – Time of inactivity, after which the user at this console is logged
out from OSD access automatically.
0 min – Immediate Logout from OSD after closing the OSD.
Switch Options
Field Selection Description
Allow Sharing Y/N
Y – User may connect to any unlocked CPU with Video Access Only.
NOTE: Switch with <space> Key, no <Return>.
Force
Connect
Y/N
Y – User may connect to any unlocked CPU with full control forcing
any previous user to Video Access only.
Note: Switch with <Return> Key.
N – No Force Connect.
Force
Disconnect
Y/N
Y – User may connect to any unlocked CPU with full control. Previous user is
disconnected.
Note: Switch with <Return> Key.
N – No Force Disconnect.
KVM
Listview
Y – OSD is opened with Menu “KVM List“ (default)
(Dynamic display of available CPU Ports).
N – OSD is opened with Menu “KVM Switch“
(Static display of available CPU Ports)..
KVM Auto Close Y/N
Y – Immediate exit from OSD after switching CPU Port in Menu “KVM List“
or “KVM Switch“ with immediate display of the new CPU.
N – No Auto Close
Mouse Options
Field Selection Description
Hor. Speed VAL2
Setting up the horizontal mouse speed
Ver. Speed VAL2
Setting up the vertical mouse speed.
Mouse Click VAL3
Setting up the time frame for “Double Click”
NOTE: Mouse settings are CON Port specific and can be adjusted for each CON Port separately.
NOTE: If “Allow sharing” is activated, the current user of a CPU will not note if
other users gain video access to his CPU.