Instruction manual

10
Orion Installation and Operations Manual
Configure system menu
Figure 7. Configure System menu
System options
Field Selection Description
Name CHR16
(Input) Configuration name.
Used for saving the current configuration to file.
Device CHR16
(Input) Device name
(displayed in all menus at the lower left)
Info. CHR64
(Input) Detailed information about the current configuration
Slave Y/N
Y – This switch is configured according to a master switch and remotely controlled
No configuration possible.
N – No slave mode
Load Default Y/N
Y – Upon “Power On” or “Restart” the switch will boot with the Default
configuration.
N – Upon “Power On” or “Restart” the switch will boot with the last configuration.
Auto Save Y/N
Y – Switch saves periodically the current configuration into flash.
N – No automatic saving
Enable
COM Echo
Y/N
Y – Switch sends echoes of all performed switch commands
N – No Echoes.
Lock
COM Ports
Y/N
Y – While an OSD is open, all commands via external interfaces are rejected
(LAN, serial).
N – No rejection
Enable
Login
Y/N
Y – Login required to access the OSD with user name and password. After login,
the user will remain logged in until he explicitly logs out or an Auto Logout has
been performed (cf. below). KVM Switching with Hot Keys requires the user to
be logged in.
N – No Login required.
User Matrix Y/N
Y – User access restricted to CPU’s explicitly unlocked in the User
Matrix. User matrix mode requires user login and implies “Enable
Login“ = “Y“. KVM Switching with Hot Keys requires the user to
be logged in.
N –User Matrix disabled.