User`s manual

BIOS SETUP
MB770 User’s Manual 41
Select Display Device
By default, this field is set to CRT+LVDS.
Panel Type
By default, this field is set to 1024x768 18Bit SC02.
Outport Port
By default, this field is set to DI0.
Dithering
By default, this field is set to Disabled.
TV H/W Layout
By default, this field is set to Default.
TV Type
By default, this field is set to NTSC.
TV Output Connector
The field allows you to choose the TV output connector to be used.
CPU & PCI Bus Control
The fields related to CPU & PCI Bus Control are listed below.
PCI Master 0 WS Write
This determines whether the chipset inserts a delay before any writes from
the PCI bus.
PCI Delay Transaction
This is used to meet the latency of PCI cycles to and from the ISA bus.
Vlink mode selection
The default is set to By Auto.
Vlink 8X Support
By default, this field is enabled.
DRDY_Timing
By default, this field is set to Default.