Warranty

Revised on 4.30.2018 | Roppe Corporation | 1602 N. Union St. - Fostoria, OH 44830 | (800) 537 – 9527 | Page 2
Rubber Tile & Sheet
Limited Commercial Warranty
These warranties are specific to the Products described in the Manufacturer’s Catalog and no
other products. The warranties are only provided to original purchasing authority, company, person, entity,
building and/or project and are non-transferable.
Products must be selected, installed, used, maintained and cared for in accordance with the Guidelines and
Technical Data. The Products must be installed by a professional, licensed and experienced installer only. Any
installation by anyone other than a professional installer shall void any and all expressed or implied
warranties. Guidelines may be obtained from the appropriate organization. Technical Data may be obtained at
www.roppe.com and are available upon request (800) 537 - 9527.
WARRANTY EXCLUSIONS: The above warranties do not apply or cover any of the following:
1. Any expressed or implied promise made by any architect, designer, representative, sales agent,
distributor or installer without expressed, written consent from Manufacturer’s technical staff.
2. Normal Product shade, color or dimensional variations that are within normal tolerances.
3. Products installed with visible and obvious manufacturing defects.
4. Products installed outside of product limitations found in Technical Data.
5. Discoloration or damage caused by improper or incompatible cleaning products, floor finishes or
finish removal products, as well as improper maintenance procedures, tools or machinery.
6. Discoloration or damage caused by subfloor or adhesive pH levels.
7. Discoloration or damage caused by direct and/or indirect UV light exposure.
8. Products that has not been installed in strict accordance with Guidelines and Technical Data.
9. Products that have not been installed with an explicitly compatible adhesive.
10. Products that have been damaged by excessive topical water, from such causes as improper or
excessive maintenance, broken or leaking plumbing, sink overflow, flooding or weather conditions.
11. Products that have been damaged by hydrostatic pressure, osmosis, excessive subfloor moisture or
moisture-related issues.
12. Products that have been damaged by negligence or accident, such as tears, burns or cuts.
13. Products that have been damaged by sharp, pointed objects, such as high heels, spikes or skates,
unless explicitly allowed within the Technical Data.
14. Products that have been damaged by incompatible materials, such as acids, alkalis and solvents.
15. Products that have been damaged by animal or vegetable fats, oils or grease and petroleum-based
hydrocarbons, unless explicitly allowed within the Technical Data.
16. Products that have been damaged by circumstances beyond the reasonable control of
Manufacturer, such as ambient or substrate conditions.
17. Products that have been damaged or deformed by substrate imperfections, damage or improper
substrate selection (per the Technical Data) and installation.
18. Products that have been subjected to conditions of use or maintenance not in strict conformity
with the Technical Data.
19. Any Products that have been sold or resold as “seconds”, “mill-run”, “non-conforming”, “as is” or
otherwise denoted as non-standard quality.
20. Unreasonable costs associated with product replacement, such as labor costs outside of pro-rated
schedule, overtime and loss of use or business.
WARRANTY CLAIMS: If, within the applicable warranty period identified in the Warranty Terms, the original
purchaser discovers any problems or defects in the Products that may be covered by this Standard Limited