Installation Guide

ManualsBrandsROPPE ManualsFlooringVantage Circular Profile Black 20.4 in. x 48 in. Rubber Square Stair Tread

02.17.2017 | Page 1

TECHNICAL DATA SHEET

RUBBER STAIR TREADS,

RISERS & STRINGERS

raised design

& specialty

Roppe Corporation | 1602 N. Union St. - Fostoria, OH 44830 | (800) 537 - 9527

• PVC Free

• Does Not Require A Finish

• Extremely Durable

• ADA Compliant

• Optimized For Visually Impaired

• Excellent Chemical Resistance

• Excellent Slip Resistance

• Recyclable (IMPACT Recycling Program)

• Qualiﬁes for LEED® Credits

• FloorScore® Certiﬁed

Product Description

Technical Data

Approved Adhesives

AW-510 Acrylic Wet-Set Adhesive

EN-610 Epoxy Nose Filler Adhesive

C-630 Contact Adhesive

TP-620 Pressure Sensitive Tape

MS-700 Modiﬁed Silane Adhesive

EW-710 Epoxy Wet-Set Adhesive

Custom Offerings

At a minimum of 600 lin. ft. plus 10%

overage, product ﬁeld color may be

altered, in combination with existing

chip colors, to match other colors by

request. At a minimum of 1400 lin.

ft. plus 10% overage, product ﬁeld

color and chip color may be altered to

match other colors by request.

Availability, Cost & Samples

Roppe Flooring products are sold

through distribution. To locate the

nearest distributor, visit roppe.com

or send an e-mail to support@roppe.

com.

Technical Documents & Support

Additional product resources and

technical documents are available

online at roppe.com. For additional

technical support, send an e-mail to

solutions@rhctechnical.com.

Roppe Raised Design and Specialty

rubber stair treads, risers and stringers

are speciﬁcally designed for use

on all interior stairs, including pan-

ﬁlled concrete and wood substrates.

Roppe Raised Design and Specialty

are vulcanized and compression-

molded from a high-grade synthetic

rubber compound that is solid,

homogeneous and durable. Roppe

offers a variety of options within

the Raised Design and Specialty

product line, including treads with

abrasive, smooth or ribbed inserts in

a multitude of standard colors and

the option to customize colors and

color combinations. Raised Design

and Specialty stair treads are ideal

for indoor use in most commercial,

industrial or residential applications,

such as schools, hospitals, department

stores, government buildings, hotels,

dormitories, sports complexes, airport

terminals, shopping malls and any

other public or private building.

LEED v2009 IEQ Credit 4.1:

LEED v2009 IEQ Credit 4.3:

ASTM F2169 – Resilient Stair Treads:

ASTM E648 (NFPA 253) - Critical Radiant Flux:

ASTM E662 (NFPA 258) - Smoke Density:

CAN/ULC-S102.2 - Surface Burning:

ASTM F925 – Chemical Resistance:

ASTM D2047 – Slip Resistance:

ASTM F1514 – Heat Stability:

Acclimation Time:

Storage & Acclimation Temperature:

Qualiﬁes

Type TS, Class 1 & 2,

Group 1 & 2, Grade 1

Class I, > 0.45 W/cm

Passes, <450

FSR 115, SDS 275

Passes (see chart)

> 0.6

Passes

48 Hours

65° - 85° F

Additional Information

Features

Summary of content (11 pages)

PAGE 1
raised design & specialty R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T Product Description Roppe Raised Design and Specialty rubber stair treads, risers and stringers are specifically designed for use on all interior stairs, including panfilled concrete and wood substrates. Roppe Raised Design and Specialty are vulcanized and compressionmolded from a high-grade synthetic rubber compound that is solid, homogeneous and durable.
PAGE 2
raised design & specialty T E C H N I C A L DATA S H E E T R U B B E R S TA I R T R E A D S , RISERS & STRINGERS Diamond Treads #30 Diamond Square Nose Tread Nose Type: Nose Length: Leading Edge Thickness: Back Edge Thickness: Tread Depth: Tread Length: (Optional) Safety Strip Width: Safety Strip Spacing: Safety Strip Material: Coordinating Landing Tile: Weight Per Lineal Foot: Treads Per Carton: Square w/ Taper & Relief Cut 1 9/16" (39.69 mm) 3/16" (4.76 mm) 1/8" (3.2 mm) 12" (304.8 mm) 36" (.
PAGE 3
raised design & specialty T E C H N I C A L DATA S H E E T R U B B E R S TA I R T R E A D S , RISERS & STRINGERS Smooth Treads #60 Smooth Heavy-Duty Square Nose Tread Nose Type: Nose Length: Leading Edge Thickness: Back Edge Thickness: Tread Depth: Tread Length: (Optional) Safety Strip Width: Safety Strip Spacing: Safety Strip Material: Coordinating Landing Tile: Weight Per Lineal Foot: Treads Per Carton: Square Nose Type: 1 9/16" (39.69 mm) Nose Length: 1/4" (6.35 mm) Leading Edge Thickness: 3/16" (4.
PAGE 4
raised design & specialty T E C H N I C A L DATA S H E E T R U B B E R S TA I R T R E A D S , RISERS & STRINGERS Profiled Treads #92 Low Profile Raised Circular Design Tread Nose Type: Nose Length: Leading Edge Thickness: Back Edge Thickness: Tread Depth: Tread Length: (Optional) Safety Strip Width: Safety Strip Spacing: Safety Strip Material: Coordinating Landing Tile: Weight Per Lineal Foot: Treads Per Carton: Square Nose Type: 1 9/16" (39.69 mm) Nose Length: 3/16" (4.
PAGE 5
raised design & specialty R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T One-Piece Tread & Riser #95 Hammered Design Tread & Riser Nose Type: Nose Length: Leading Edge Thickness: Back Edge Thickness: Tread Depth: Tread Length: (Optional) Safety Strip Width: Safety Strip Spacing: Safety Strip Material: Coordinating Landing Tile: Weight Per Lineal Foot: Treads Per Carton: #96 Vantage Design Tread Square w/ Taper Nose Type: 1 9/16" (39.69 mm) Nose Length: 13/64" (5.
PAGE 6
raised design & specialty R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T allow product to be directly exposed to extreme heat sources, such as radiators, ovens or other high-heat equipment. May be susceptible to staining from harsh disinfectants, cleaning agents, dyes or other harsh chemicals – ensure all chemicals and materials that may come in contact with stair treads, risers or stringers will not stain, mar or otherwise damage the material prior to use. 3.
PAGE 7
raised design & specialty T E C H N I C A L DATA S H E E T thickness of 1/4” and is fully sanded prior to installation. When stairs may be subjected to moisture, use an APA approved exterior grade plywood. Other wood materials, such as OSB, lauan, particleboard, chipboard, fiberboard or cementitious tile backer boards, are not acceptable substrates.
PAGE 8
raised design & specialty T E C H N I C A L DATA S H E E T riser and step nose. Cut several triangular holes in the center of the template and tape template to stringer substrate to hold in place while trimming. Template should be flat, flush and must not contain any creases or ripples to ensure that final template is accurate. Carefully trim template to match step, riser and step nose. Place the stringer template over the stringer material and mark cut lines using suitable marker.
PAGE 9
raised design & specialty R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T installation. When necessary, rough cut riser to within 1/2" - 2" of step dimensions to make scribing and trimming easier. Align the riser to the right side of the step and set divider to the distance between the center mark on the step and the center mark on the riser. While applying firm pressure to the stringer material with divider, mark the riser with the divider to determine scribe line.
PAGE 10
raised design & specialty T E C H N I C A L DATA S H E E T on material that is installed into wet adhesive could cause adhesive to displace. When working off of material is not possible, use a kneeling board or equivalent to disperse weight evenly and prevent adhesive displacement. Periodically lift material to ensure proper adhesive transfer and ensure adhesive has not surpassed the open time – adhesive should cover 90% of the stair tread and riser.
PAGE 11
raised design & specialty R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T to remove dirt, debris and any remaining mold release chemicals. If stair tread is heavily soiled, additional cleaning may be required. Use a wet vacuum or clean mop to remove any and all excess cleaning solution. Rinse area with clean, cool water and allow floor to dry entirely.