Installation & Assembly

ManualsBrandsROPPE ManualsFlooringLow Circular Profile Pewter 12.5 in. x 48 in. Rubber Square Nose Stair Tread

01.30.2018 | Page 1

TECHNICAL DATA SHEET

RUBBER STAIR TREADS,

RISERS & STRINGERS

raised design

Roppe Corporation | 1602 N. Union St. - Fostoria, OH 44830 | (800) 537 - 9527

• PVC Free

• Does Not Require A Finish

• Extremely Durable

• ADA Compliant

• Optimized For Visually Impaired

• Excellent Chemical Resistance

• Excellent Slip Resistance

• Recyclable (IMPACT Recycling Program)

• Qualiﬁes for LEED® Credits

• FloorScore® Certiﬁed

Product Description

Technical Data

Approved Adhesives

AW-510 Acrylic Wet-Set Adhesive

EN-610 Epoxy Nose Filler Adhesive

C-630 Contact Adhesive

TP-620 Pressure Sensitive Tape

MS-700 Modiﬁed Silane Adhesive

EW-710 Epoxy Wet-Set Adhesive

Availability, Cost & Samples

Roppe Flooring products are sold

through distribution. To locate the

nearest distributor, visit roppe.com

or send an e-mail to support@roppe.

com.

Technical Documents & Support

Additional product resources and

technical documents are available

online at roppe.com. For additional

technical support, send an e-mail to

solutions@rhctechnical.com.

Roppe Raised Design rubber stair

treads, risers and stringers are

speciﬁcally designed for use on all

interior stairs, including pan-ﬁlled

concrete and wood substrates. Roppe

Raised Design are vulcanized and

compression-molded from a high-

grade synthetic rubber compound

that is solid, homogeneous and

durable. Roppe offers a variety of

options within the Raised Design

product line, including treads with

abrasive, smooth or ribbed inserts in

a multitude of standard colors and the

option to customize colors and color

combinations. Raised Design stair

treads are ideal for indoor use in most

commercial or industrial applications,

such as schools, hospitals, department

stores, government buildings, hotels,

dormitories, sports complexes, airport

terminals, shopping malls and any

other public or private building.

LEED v2009 IEQ Credit 4.1:

LEED v2009 IEQ Credit 4.3:

ASTM F2169 – Resilient Stair Treads:

ASTM E648 (NFPA 253) - Critical Radiant Flux:

ASTM E662 (NFPA 258) - Smoke Density:

CAN/ULC-S102.2 - Surface Burning:

ASTM F925 – Chemical Resistance:

ASTM D2047 – Slip Resistance:

ASTM F1514 – Heat Stability:

Acclimation Time:

Storage & Acclimation Temperature:

Qualiﬁes

Type TS, Class 1 & 2,

Group 1 & 2, Grade 1

Class I, > 0.45 W/cm

Passes, <450

FSR 115, SDS 275

Passes (see chart)

> 0.6

Passes

48 Hours

65° - 85° F

Additional Information

Features

Summary of content (11 pages)

PAGE 1
raised design R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T Product Description Roppe Raised Design rubber stair treads, risers and stringers are specifically designed for use on all interior stairs, including pan-filled concrete and wood substrates. Roppe Raised Design are vulcanized and compression-molded from a highgrade synthetic rubber compound that is solid, homogeneous and durable.
PAGE 2
raised design T E C H N I C A L DATA S H E E T R U B B E R S TA I R T R E A D S , RISERS & STRINGERS Diamond Treads #30 Diamond Square Nose Tread Nose Type: Nose Length: Leading Edge Thickness: Back Edge Thickness: Tread Depth: Tread Length: (Optional) Safety Strip Width: Safety Strip Spacing: Safety Strip Material: Coordinating Landing Tile: Weight Per Lineal Foot: Treads Per Carton: Square w/ Taper & Relief Cut 1 9/16" (39.69 mm) 3/16" (4.76 mm) 1/8" (3.2 mm) 12" (304.8 mm) 36" (.91 m), 42" (1.
PAGE 3
raised design T E C H N I C A L DATA S H E E T R U B B E R S TA I R T R E A D S , RISERS & STRINGERS Smooth Treads #60 Smooth Heavy-Duty Square Nose Tread Nose Type: Nose Length: Leading Edge Thickness: Back Edge Thickness: Tread Depth: Tread Length: (Optional) Safety Strip Width: Safety Strip Spacing: Safety Strip Material: Coordinating Landing Tile: Weight Per Lineal Foot: Treads Per Carton: Square Nose Type: 1 9/16" (39.69 mm) Nose Length: 1/4" (6.35 mm) Leading Edge Thickness: 3/16" (4.
PAGE 4
raised design T E C H N I C A L DATA S H E E T R U B B E R S TA I R T R E A D S , RISERS & STRINGERS Profiled Treads #92 Low Profile Raised Circular Design Tread Nose Type: Nose Length: Leading Edge Thickness: Back Edge Thickness: Tread Depth: Tread Length: (Optional) Safety Strip Width: Safety Strip Spacing: Safety Strip Material: Coordinating Landing Tile: Weight Per Lineal Foot: Treads Per Carton: Square Nose Type: 1 9/16" (39.69 mm) Nose Length: 3/16" (4.76 mm) Leading Edge Thickness: 1/8" (3.
PAGE 5
raised design R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T One-Piece Tread & Riser #95 Hammered Design Tread & Riser Nose Type: Nose Length: Leading Edge Thickness: Back Edge Thickness: Tread Depth: Tread Length: (Optional) Safety Strip Width: Safety Strip Spacing: Safety Strip Material: Coordinating Landing Tile: Weight Per Lineal Foot: Treads Per Carton: #96 Vantage Design Tread & Riser Square w/ Taper Nose Type: 1 9/16" (39.69 mm) Nose Length: 13/64" (5.
PAGE 6
raised design R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T to be directly exposed to extreme heat sources, such as radiators, ovens or other high-heat equipment. May be susceptible to staining from harsh disinfectants, cleaning agents, dyes or other harsh chemicals – ensure all chemicals and materials that may come in contact with stair treads, risers or stringers will not stain, mar or otherwise damage the material prior to use. 3.
PAGE 7
raised design T E C H N I C A L DATA S H E E T fiberboard or cementitious tile backer boards, are not acceptable substrates. Avoid preservative-treated and fireretardant plywood, as some may be manufactured with resins or adhesives that may cause discoloration or staining of materials.
PAGE 8
raised design T E C H N I C A L DATA S H E E T template to match step, riser and step nose. Place the stringer template over the stringer material and mark cut lines using suitable marker. Rough cut using a suitable knife that is intended for resilient flooring materials. All final adjustments must be made prior to installing adhesive. Stringer should be flush with all step surfaces. Apply adhesive according to instructions for specific product in use.
PAGE 9
raised design R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T material with divider, mark the riser with the divider to determine scribe line. Use a suitable knife to trim riser along the scribe mark. Once the right side of the riser is scribed and trimmed, reposition the riser to align to the left side of the step. Reset the divider to the distance between the center mark on the step riser and the center mark on the stair tread.
PAGE 10
raised design T E C H N I C A L DATA S H E E T Periodically lift material to ensure proper adhesive transfer and ensure adhesive has not surpassed the open time – adhesive should cover 90% of the stair tread and riser. Clean excessive adhesive or adhesive residue from the surface of the material using a clean cloth or mop and a solution of warm water and a pH neutral cleaner. Do not use abrasive or solvent based cleaners.
PAGE 11
raised design R U B B E R S TA I R T R E A D S , RISERS & STRINGERS T E C H N I C A L DATA S H E E T solution. Rinse area with clean, cool water and allow floor to dry entirely. Do not use detergents, abrasive cleaners or “mop and shine” type products, as they will dull the finish and sheen of the stair tread material. Do not use vacuums that have a beater bar or electric brooms with hard plastic bottoms or no padding, as this may cause discoloration, scratching and loss of sheen.