User Manual

TF 200.01.0016_ENG

Dismounting

• Brake the rear wheels.

• Loosen the tightening handle.

• Note! Do not unscrew it completely.

• Lift the hand support off the mast holder.

• Note! It may be stuck owing to the clamping plates.

• Pull the locking screw while turning the spreader bar 90° counter-clockwise.

• The lifting unit may now be pulled out

Note! Be aware of the weight of the lifting unit.

Mounting of directional steering of the front wheels

• Dismount the M10x45 countersunk screw with washer and nut keeping the wheel in place.

• Mount plate and holder for steering using the new M10x50 countersunk screw.

Nut and

washer

M10 screw

With

steering

Without

steering

Front

wheel