User Manual

TF 200.01.0016_ENG

4.2 Installation of liftig unit and hand support

• Brake the rear wheels.

• Hold the lifting unit (turn it through 90°) so that the locking pin may be pushed into the corresponding

slide rail of the lifting mast.

• Push in the lifting unit.

• Now turn it 90° clockwise until a click is heard from the locking screw.

• Check that the arm has been properly locked.

• Hook the hand support on to the mast holder.

• Tighten the tightening handle on the side.

The walking trainer is now ready for use.

Tightening

handle

Locking pin