User Manual

TF 200.01.0016_ENG
11
4. Instructions for use
4.1 Installation of product
Note! Assembly of 150kg and 200kg Walking
Trainers is identical. The only difference is the
undercarriage.
• Place the lifting mast in the mast holder of
the frame. Tighten the two screws with the
5mm Insex wrench provided, and use
locking nut on opposite site.
• Connect the cable from the leg spreading
motor to the control unit in output terminal 2,
see “Electrical component diagram”
Screws
M6 l
Screws