All-in-one walking trainer User manual This manual should always be in close proximity of the product. TF 200.01.
TF 200.01.0016_ENG Table of content 1. Symbols used in this manual .................................................................................................................. 4 2. General safety ........................................................................................................................................... 4 2.1 Product Unit label ...................................................................................................................... 6 2.
TF 200.01.0016_ENG 7.6 Maintenance report actuator/lifting motor ................................................................................ 25 7.7 8. Lifetime of actuator/liftingmotor................................................................................................ 26 Components part list.............................................................................................................................. 27 8.1 Spare parts .......................................................
TF 200.01.0016_ENG 1. Symbols used in this manual Warning Symbol Indication of potentially hazardous situation. If not avoided it can result in serious injury or death. Caution Symbol Indication of potentially hazardous situation which may result in minor or moderate injury. It may also be used to alert against unsafe practices. Notification Symbol This symbol is used to notify correct use and handling of the product. 2. General safety This manual must be read and understood before use.
TF 200.01.0016_ENG Do not perform repairs, disassembly or assembly operations, add-ons, re-adjustments or modification of the product beyond what is described in this manual. These must be carried out by Ropox or Ropox authorized personnel. Do not perform service while in use.
TF 200.01.0016_ENG 2.1 Product Unit label This product is CE-marked in accordance with: European Medical Device Directive 93/42/EEC, including amendments incorporated in Directive 2007/47/EEC. European Medical Device Regulation (EU)2017/745 Council Directive 2006/42/EC on machinery Council Directive 2011/65/EU, RoHS Manufacturer name and address Date of production Stock number Serial number Consult manual before use Operating interval of electrically operated equipment.
TF 200.01.0016_ENG 2.2 Sales and transport packaging Transport packaging label Sales packaging label 3. General requirements 3.1 Product information Manufacturer: Ropox A/S Ringstedgade 221, DK-4700 Naestved +45 55 75 05 00 Email: Info@ropox.
TF 200.01.0016_ENG Accessories Item Number 25-20135-8 Model/specification Walking Trainer kit 3.2 Product description The all in one walking trainer system is a mobile personal lifter for people with limited mobility who need help with walking training. The health staff can lift people up to 150/200 kg by using different sails. 3.3 Intended purpose The product is used in situations where a patient must be lifted from a sitting position and up to a standing position.
TF 200.01.0016_ENG 3.9 Product dimensions 25-20035 150kg 25-20526 200kg Lifting capacity 150 kg 200 kg Min. lifting height, lifting hook 150 cm 150 cm Max. lifting height, lifting hook 190 cm 190 cm Lifting travel 40 cm 40 cm Min. height of handle 75 cm 75 cm Max. height of handle 105 cm 105 cm 65 cm 65 cm 117 cm 122 cm Length legs 97 cm 98 cm Min. inside distance between legs 50 cm 54 cm Max. inside distance between legs 94 cm 118 cm Min.
TF 200.01.0016_ENG 3.12 Complaints and adverse events Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent authority of the Member State in which the user and/or patient is located.
TF 200.01.0016_ENG 4. Instructions for use 4.1 Installation of product Note! Assembly of 150kg and 200kg Walking Trainers is identical. The only difference is the undercarriage. • Place the lifting mast in the mast holder of the frame. Tighten the two screws with the 5mm Insex wrench provided, and use locking nut on opposite site.
TF 200.01.0016_ENG 4.2 Installation of liftig unit and hand support • • • • • • • Brake the rear wheels. Hold the lifting unit (turn it through 90°) so that the locking pin may be pushed into the corresponding slide rail of the lifting mast. Push in the lifting unit. Now turn it 90° clockwise until a click is heard from the locking screw. Check that the arm has been properly locked. Hook the hand support on to the mast holder. Tighten the tightening handle on the side.
TF 200.01.0016_ENG Dismounting • • • • • • • Brake the rear wheels. Loosen the tightening handle. Note! Do not unscrew it completely. Lift the hand support off the mast holder. Note! It may be stuck owing to the clamping plates. Pull the locking screw while turning the spreader bar 90° counter-clockwise. The lifting unit may now be pulled out Note! Be aware of the weight of the lifting unit.
TF 200.01.0016_ENG 4.3 Operating the product NOTE! It is important that you are familiar with the use of the hoist and its functions, and that it works properly. So for the best possible safety, all users of the hoist must read this user manual before using the hoist. For the All-in-One you can use any of Ropox Domino slings. 4.3.1 Operating instructions - - Check that the emergency stop has been released. If not, turn the button clockwise until release.
TF 200.01.0016_ENG NOTE! Make sure that the plug from the battery is correctly inserted in the control box, if the plug have been pulled out, before using the lift again. 4.5 Safety function, liftingmotor The lifting motor is provided with a safety function, splejn, against jamming. If the lifting arm meets with resistance during lowering, the movement of the arm will stop automatically. Thus, a person cannot get jammed between the lifting arm and the bed. 4.
TF 200.01.0016_ENG The lifting motor has a mechanical emergency lowering facility. To release it, pull the red handle. 4.8 Brakes Brake The hoist may be braked on the two large rear wheels. Press down the rear part of the brake with the foot to brake the hoist. Release the brake by pressing the front part of the brake with the foot. Release NOTE! Never brake the hoist during lifting except when used in stand-up mode.
TF 200.01.0016_ENG 4.9 Transfer – walking trainer • Before lifting a person it is important to be familiar with the walking trainer and that it works satisfactorily. • Also, it is important to choose the right size of sling for the lifting operation to be performed. Further information about the use of slings will be found in the ”Walking Trainer Manual for Slings”. • We recommend that the walking training take place on a horizontal surface.
TF 200.01.0016_ENG 4.9.2 Using the walking trainer • The carer may walk in front of or beside the walking trainer, instructing or supporting the client. • Raising or lowering the sling frame will relieve the client depending on the phase of walking training. • Use the hand support to begin with in order to give the client something to hold on to and to use for pushing/steering. • During the last phase of the walking training the client may use the hand support only without the support of the sling.
TF 200.01.0016_ENG 4.10 Height adjustment of hand support Press red button, afterwards pull locking tap. Hand support can now be pulled upwards or pushed downwards for adjustment of correct height for user.
TF 200.01.0016_ENG 4.
TF 200.01.0016_ENG 5. Trouble shooting If the walking trainer does not work, check and test the following procedures before contacting an authorised distributor. - Has the battery been charged? - Has the emergency stop been released? - Have all plugs been inserted correctly? - Does the hand control unit work properly and has it been mounted correctly? - Try with another hand control unit or charger.
TF 200.01.0016_ENG 7. Maintenance Notification! Failing to comply with periodic maintenance may result of degrading of product function and safety. 7.1 Periodic maintenance Always make sure that the mechanical and electrical systems of the hoist operate satisfactorily. In case of malfunction stop the hoist and check or repair it, as required. Malfunction may be a symptom of a defect, which may become worse and present a safety risk in critical situations.
TF 200.01.0016_ENG 7.4 Yearly inspection Preventive service must be made once a year. Follow the procedures below must be followed. - Forms to service report Take a copy off the forms on page 4 and 5 and use them when filling out the service report.
TF 200.01.0016_ENG 7.5 Maintenance report mechanical parts Invoice address: Repair Delivery address: Mounting Service Lift type: Serial No.
TF 200.01.0016_ENG 7.6 Maintenance report actuator/lifting motor Invoice address: Repair Delivery address: Mounting Service Warranty Lift type: Serial No. Inspection carried out OK Not OK Remarks Powercomsumption without load Powercomsumption with max.
TF 200.01.0016_ENG 7.7 Lifetime of actuator/liftingmotor A service technician fill out the below points from the user information How often is the lift used pr. day : Actuators production date : Expected changing of actuator : Table to determine an actuators lifetime Note!! The lifting actuator should be changed when it is max. 6 years or after 10.000 strokes. Continiue normal use Lifts pr.
TF 200.01.0016_ENG 8. Components part list Notefication! Ropox will make parts list and circuit diagrams available for extraordinary maintenance and repair beyond what is described in this manual. Repair beyond what is described in this manual may only be done by Ropox designated service personnel. 8.1 Spare parts Position 1 2 3 4 5 6 7 Description Battery Control box Lifting motor Hand control unit Leg spreading motor Brake wheels Wheels Number in product 1 1 1 1 1 2 2 Item no.
TF 200.01.0016_ENG 9. Environmental protection The product is not intended to be disposed as municipal waste. Proper disassembly, sorting and disposal of components must be done by waste disposal professionals. Part Control box Motors Handcontrol unit Battery Handle Frame Wheel Disposal recommendation Electronics Electronics Electronics Electronics Hard plastic Steel waste Hard plastic 10. Electro magnetic compability 10.
