User Manual

Page 7
© ROPOX 2015
Ropox Verti-Inside
Cabinet depth 26.5cm/10,2in or 31cm/12,2in and cabinet width
40-100cm / 15,7 – 39,3 in
(30-40404 to 30-40420)
Construction – see dimensions on the following page
Minimum area for reinforcement of wall. Wall material must be suitable
for screw mounting.
Area for electric installation.
Area for conduit.
Cabinet height of 70.4cm/27,6in or more. For cabinet heights above
70.4cm/27,6in a fixed shelf is placed in the upper part of the cabinet (see
illustration).
Cable for operation must be laid from the cabinet to the front edge of the
worktop for mounting of the control switch. We recommend the installation
of an empty conduit in the wall to accommodate the cable (ø3.5cm).
If a high cabinet stands in the immediate vicinity of Verti-Inside, the cable
may be run through the cabinet to avoid the conduit in the wall.
Max. load 176kg evenly distributed over all three shelves for cabinets up to
100cm/39,3in in width, according to DS/EN 12182, based on 8 screws/bolts.
Minimum load capacity per screw/bolt:
10.5kg/23lb
The fitter should always consider the material, condition and strength of the
wall and use screws and rawlplugs suitable for the specific wall type.
Cabinet height of 70.4 cm Cabinet height above 70.4 cm