User Manual

Page 16
© ROPOX 2015
Ropox FlexiCorner
Construction – see dimensions on the following page
Minimum area for reinforcement of wall. Wall must be suitable for
screw mounting.
Area for electric and plumbing installations.
Max. load 150kg/330lb evenly distributed over the worktop up to
300cm/118in width, according to DS/EN 12182.
Min. load capacity per screw/bolt:
40 kg/ 88lb
The fitter should always consider the material, condition and strength of the
wall and use screws and rawlplugs suitable for the specific wall type.