User Manual

Page 18

Fault finding

Error

Possible remedy

Washbasin cannot be

locked

Check that washbasin and Dock-in have been installed as

prescribed. Check that they are both level and that the

mounting screws are fastened securely in the wall.

Washbasin is locked, but

cannot be released

Check if the locking screws are tightened. See page 5. If so

please loosen or remove these.

Washbasin hits Dock-in

station and cannot reach

locking mechanism

Check that washbasin and Dock-in have been installed as

prescribed. Check that they are both level and that the

mounting screws are fastened securely in the wall.

Waste handling

Used equipment must be disposed of according to national law. We

recommend dismantling of the product to the greatest possible extent so that

most parts may be reused. Example of sorting groups: Metal and compact

laminate.

Normal use

Temperature: 0 °C to 50 °C

Relative humidity: 5% to 85% non-condensing

Storage and transport

Fragile

Keep away from water

This side up