User Manual

Page 15
© ROPOX 2014
Instructions
Deactivation of the lock
It is also possible to use the screws to deactivate the locking system if desired. This is
done by inserting and tighten one of the screws while pulling out the handle. This
only has to be done in one of the side to work.
Recommendations
• Be careful not to load the washbasin during coupling with the Dock-in station. This
may result in inaccuracies and mean that the washbasin cannot be locked or hits the
upper or lower edge of the Dock-in station.
• To obtain a long life of the locking mechanism as well as proper locking of the
washbasin it is recommended to guide the washbasin slowly during coupling with
the Dock-in station.
• Please note that the Dock-in station is designed to provide stability so that you may
lean on but not hang on it.
To ensure optimum utilization of the features of the Ropox Dock-in
station and to avoid accidents it is important to follow these basic
safety procedures.