Ropox Dock-in User Manual Keep this manual with the product at all times PDF 6068 / 25.05.
Contents Product information ............................................................................................................................... 3 Technical data ....................................................................................................................................... 4 Dimension sketches ................................................................................................................................................ 5 Mounting instruction ............
Product information It is important to read this manual before use. Product: Ropox Dock-in Manufacturer: Ropox, DK-4700 Naestved, Tel. +45 55 75 05 00 Application: This Ropox Dock-in station is used in connection with the Ropox swing washbasin. It is designed to provide an extra tabletop around the washbasin and to increase the stability and safety when the washbasin is locked. The Dock-in station is ideal for use in private homes, care centres or similar institutions.
Technical data Height adjustment 150mm Materials Tabletop: Molded marble and polymer with sanitary gelcoat surface Frame: Surface-treated steel Locking mechanism: Stainless steel Surface treatment Steel: Blue chromate, powder-coated, white RAL 9003 mat Maximum load According to DS/ISO 17966 maximum user weight is 245kg.
Dimension sketches 1018 230 615 54 750 - 900 470 Page 5 © ROPOX 2014
Mounting instruction Mounting templates No. 1 For Swing Wash Basin 40-41110 og 40-41120 No. 2 For Swing Wash Basin 40-41130 No. 3 For Swing Wash Basin 40-41140 No.
Retrofitting of Dock-in 1 Mounting template 2 Page 7 © ROPOX 2014
3 4 Page 8 © ROPOX 2014
Without the mounting template For Ropox Swing Wash Basin (fixed height) 40-41110 40-41120 For Ropox Swing Wash Basin (height adjustable) 40-41130 40-41140 ATTENTION: The sink must be in top position 4b Page 9 © ROPOX 2014
The screws and rawlplugs included are for mounting on a concrete wall. The installer must always examine the material, condition and strength of the wall and use appropriate screws and rawlplugs. Maximum load in the top screws are 98kg / 216lbs.
7 8 Page 11 © ROPOX 2014
Placing handle Tighten 10 9 11 Page 12 © ROPOX 2014
12 13 Page 13 © ROPOX 2014
Instructions Daily use The Dock-in station is designed to ensure easy locking of the washbasin during daily use. The washbasin is guided into the notch and will be locked automatically in the right position. To release the washbasin pull one of the two handles. This will release the washbasin from the locking mechanism after which it may swing freely. Permanent lock The wash basin can be permanently locked and thereby function as a standard wash basin.
Instructions Deactivation of the lock It is also possible to use the screws to deactivate the locking system if desired. This is done by inserting and tighten one of the screws while pulling out the handle. This only has to be done in one of the side to work. Recommendations To ensure optimum utilization of the features of the Ropox Dock-in station and to avoid accidents it is important to follow these basic safety procedures.
Instructions Height adjustment The Dock-in station can be easily height adjusted together with the Swing Wash Basin as shown. Make sure that the Dock-in station is level after the height adjustment, and insure that the Wash Basin is easy to insert and release from the Dock-in station.
Maintenance Ropox Dock-in is maintenance-free. However, for safety reasons it is recommendable to check all mounting screws and moving parts at regular intervals to ensure that the screws are fixed securely in the wall and in the washbasin. Cleaning Do not use a high-pressure washer to clean this product. Simply use a soft cloth or sponge with soapy water (pH7) of max. 60°C or cleaning alcohol. If a detergent is used the surface of the tabletop may get greasy after some time.
Fault finding Error Washbasin cannot be locked Washbasin is locked, but cannot be released Washbasin hits Dock-in station and cannot reach locking mechanism Possible remedy Check that washbasin and Dock-in have been installed as prescribed. Check that they are both level and that the mounting screws are fastened securely in the wall. Check if the locking screws are tightened. See page 5. If so please loosen or remove these. Check that washbasin and Dock-in have been installed as prescribed.
Marking Label The Ropox Dock-in station has a label of its own as illustrated. This label contains important information to be stated in connection with all approaches to the supplier. Item number Serial number 4 Name / model See explanation below Symbols Read the user manual before use. Waste must be sorted – if possible for reuse. CE-marking. This product meets the requirements for ”General Safety and Functionality” of the relevant EU-directives and standards.
Spare parts Current spare parts 40-40071-082 Fixture for washbasin 96000177 Revolving Handle Page 20 © ROPOX 2014
CE-marking EU – Declaration of Conformity Ropox hereby declares that the following product 40-40069-4 Ropox Dock-in is classified as Class I and conforms to the following directive and standard: Directives Directive No. 93/42/EEC concerning Medical Devices (risk class 1) Machinery Directive No. 2006/42/EC, amended by Directive No. 98/37/EC.
Complaints All inquiries concerning complaints must be directed to the distributor representing Ropox on the market in question. Cf. Ropox General Terms of Sale and Delivery. Ropox A/S Ringstedgade 221 DK – 4700 Naestved Tel.: +45 55 75 05 00 Fax.: +45 55 78 05 50 E-mail: info@ropox.dk www.ropox.
