Specifications

2. Using your fingers, snap the gasket into place under the lip of the inner liner. If a section of

the gasket does not readily tuck under the lip, use a small edged roller or blunt flat object to

push the gasket into place.

3. Reinstall and level the door on the refrigerator/freezer. The gap between the door and the

cabinet should be 11/16”, or about the diameter of an American dime. Check the gap in

several places along each side of the door.

REATTACHING PRODUCTION GASKET

Repair of Loose Service Replacement Gasket

Should the edge of the inner liner pull away from the outer panel flange, or not properly secure the

gasket, a service screw kit (part No. 4318172) is available for repairing this problem.

FIP Door Gasket Repair Kit

Part No. 4318172

Contents:

• (6) sheet Metal Screws

• (1) Instruction Sheet

GAP