Specifications

45
NEW DESIGN 14 cu. ft. Top-Mount
For A Colder Setting
See Figure 56 for the following.
Carefully raise the top of the rear panel of the air tower just far enough to lift the side tab out of the
slot marked “MID,” then slide the panel so that the slot marked “COLDER” is lined up with the tab.
Press firmly against the slot in the panel until the tab breaks through the plastic web.
For A Warmer Setting
See figure 56 for the following.
Carefully raise the top of the rear panel of the air tower just far enough to slide the tab out of the
slot marked “MID,” then slide the panel so that the slot marked “WARMER” is lined up with the tab.
Press firmly against the slot in the panel until the tab breaks through the plastic web.
REAR PANEL
RAISE FRONT OF REAR PANEL
AND SLIDE IN EITHER DIRECTION
TO POSITION TAB OVER DESIRED SLOT
COLDER SETTING
INCREASES
FREEZER AIR
CIRCULATION
NORMAL AIR
CIRCULATION
WARMER SETTING
DECREASES FREEZER
AIR CIRCULATION
MOVING
BAFFLE
MOVING
BAFFLE
MOVING
BAFFLE
COLDER
NORMAL
WARMER
CENTER AIR
DIFFUSER
AIR TO REFRIGERATOR ENTERS
THROUGH CENTER AIR DIFFUSER
Fig. 56
ABC