Specifications

MULLION EVAPORATOR DESIGN 12 cu. ft. Top-Mount

DEFROST

HEATER

BRACKET

TABS

WIRE

CONNECTOR

DEFROST HEATER

DRIP COVER

Servicing the Defrost Heater

1. Disconnect the wire connectors from both ends of the defrost heater.

2. Carefully lift up on the evaporator far enough to expose the defrost heater and drip cover.

3. Carefully bend the tabs on the defrost heater mounting brackets up to release the defrost heater

drip cover and remove the drip cover.

4. Remove the defrost heater from the mounting brackets.

5. Place the new defrost heater in the mounting brackets.

NOTE: Do not touch the glass tube of the defrost heater with bare hands. Body oils

and other contaminants will cause the glass tube to break when it gets hot.

Wear a pair of clean soft gloves.

6. Reinstall the defrost heater drip cover and secure it in place by bending the mounting bracket

tabs down.

Fig. 13