Specifications

118 ST-133/ST-133A Controller Manual Version 2.H
PI-MAX camera (cont.)
first lightrefer to the PI-MAX manual
gate functions 70
PTG 9
pulsed operation 65
shutter setting 16
Timing Gen connector 23
timing generators 12
Plug-in modules 17
installation and removal 81
Power cord 12
Power input module 17, 24
Power requirements 12
Power switch and indicator 15
Pre Trig In 23
Preopen Shutter mode 43
Procedures
familiarization and checkout 28, 31
First images 28, 31
line voltage selection and line fuse13
plug-in module installation/removal 81
Programmable interface (PTG) 23
Aux Trig Out 24
Auxiliary Trigger output 66
connector 73
description 65
Ext Trig In 23
External Trigger 67
handshakes 69
Internal Sync operation 45
Internal Trigger 67
module 23
Pre Trig In 23
Sel Trig Out 23
software control 70
specifications 66
timing 68
Timing Gen 23
Timing Gen interface 66
Trig Indicator 24
triggering 67
R
Readout
binning 56, 91
hardware 56, 91
digitization 59
frame transfer 58
rate 59
subsection of array 56, 91
Readout (cont.)
time 40
Readout rate
control of 59
precision vs speed tradeoff 59
Readout times (full frame) for several
CCD types
table of 56
Resolution, loss of with binning 57
ROI (Region of Interest) 20
RS-170 (EIA) 18
RTE/CCD-1300-Y/HS 83
RTE/CCD-782-Y/HS 83
S
S/N ratio 53, 58
Safe (Asynchronous) mode 39
as used for setting up 39
fast image update 39
missed events 40
Saturation 53
20
connector 20
timing 52, 87
Screws 81
Sel Trig Out 23
serial buffer board 103
SERIAL COM connector 23
Shift register 55
Shutter
compensation time 52
drive selector 16
exposure 52
external 16
shutter power connector 16
synchronization 21
modes
Disable 40
Normal 40
Preopen 40, 43
physical limitations vs. exposure 52, 87
SHUTTER IN connector 21
SHUTTER MONITOR output 21
Shutter Power connector 16
Shutter Setting dial 16
Signal-to-noise ratio
on-chip integration 53
Smearing 53, 86
frame transfer cameras 53
interline CCDs 87