User Guide

ASSET TRACKER QUICK START GUIDE
ROOSTER
®
APP ACCOUNT SET-UP
Begin by downloading the Rooster
®
App to set up your
Rooster
®
Account. The Rooster App is available as a free
download from the Apple App Store, or from Google Play
Store.
1. Download the Rooster
®
App and follow the on-screen
directions set up a Rooster
®
account, or setup your
account online at Rooster.com.
2. Check for a confirmation email from Rooster
®
, and
follow the instructions.
You will need a credit card to establish and maintain your
subscription-based account.
SYSTEM INSTALLATION
1. Install at least one Rooster
®
Hub on a piece of powered
equipment or a vehicle, connecting it to a power
supply: 6, 9, or 14 pin ODB; flying lead to power supply
(RED), ground (BLACK) and optional ignition (BLUE).
Or, install at least one Rooster
®
Hub on a building or
structure using the optional AC adapter or optional
solar panel. Rooster
®
Hubs may be mounted using zip
ties, wood screws, machine screws, or bolts no larger
than ¼”-20. The Rooster
®
Hub will begin blinking as it
initializes.
2. Follow the instructions on the Rooster
®
App for Hub
activation and assignment.
3. Attach at least one Activity Tracker to an Asset you wish
to track. Activity Trackers may be attached with high
bond adhesive tape, a high strength magnet, a flexible
lanyard, or a protective deflector.
4. Follow the instructions on the Rooster
®
App to Name
and assign the Activity Trackers to the Assets you wish
to track.
5. Track your assets using the Rooster
®
App!
WARRANTY INFORMATION (TBD)
GENERAL USE AND CARE
Rooster
®
Hubs require unobstructed access to wireless
cellular networks and GPS signals. Optimal Hub
installation requires positioning “logo” side of hub with
clear view of sky.
Activity Trackers will enter a Sleep mode after a period
of non-use. Movement or activity of an Asset equipped
with a Rooster
®
Activity Tracker will awaken the Tracker,
causing it to transmit Asset data to a Rooster
®
Hub
within range.
If you experience a flashing LED on a Rooster
®
Hub,
first call Rooster
®
Tech Support at 1-844-4ROOSTR
(1-844-476-6787).
Use of the Rooster
®
Tracking System will not prevent
theft of an Asset
Use of the Rooster
®
Tracking System may not result in
the recovery of lost or stolen Assets
Keep Rooster
®
Activity Tracker and Hub units clean and
sealed. Do not attempt to open the cases of Trackers or
Hubs, or alter or repair any interior components
Do not submerge Activity Trackers or Rooster
®
Hubs
DO NOT attach the Rooster
®
Hub on or near the
following:
» exhaust vents
» warning labels
» handrails/holds
» areas exposed to sparks
or high heat
» any other area that may
jeopardize personal safety,
safe operation of machine
or tool, or cause harm to
the device
» moving parts
» guards
» switches or controls
» submerged areas
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all instructions before
proceeding. Failure to follow all instructions may
result in electric shock, fire, property damage, and/
or serious personal injury. Please refer to the Rooster
®
Tracking System User Guide for detailed instructions on
setting up, installing and using Rooster devices.
1. Save these instructions. This Quick Start Guide and the
Comprehensive User Guide contain important safety and
operating instructions.
2. Rooster
®
Hubs are designed to be powered by 12VDC
or 24VDC power supply, optional auxiliary solar panel, or
accessory AC Adapter (110 volts).
3. (Any known hazards? Shock? Electrical? Fire? Choking?
Radiation? Carcinogens? Iconography to go with these?)
4. Rooster
®
Hubs contain no user serviceable parts or
components. (What else?)
5. Properly dispose of inoperable Activity Trackers. Activity
Trackers and Rooster
®
Hubs contain batteries. Do not
burn or incinerate Rooster
®
Hubs or Activity Trackers.
Please deposit used or unwanted Activity Tracker and
Rooster
®
Hubs with an environmentally compatible
recycling facility.
6. Do not dispose of Rooster
®
devices with household
waste material.
FCC WARNING (TBD)
SYMBOLOGY (TBD)
(Show “Read Operator’s Manual” – anything else? Shock?
Fire? Choking?)
PRODUCT SPECIFICATIONS
Operating Environment: -22°F to 140°F (-30°C to 60°C)
System Minimums: Single Hub or 1 Activity Tracker and
1 Hub
Rooster
®
Hub Dimensions: 4" x 7" x 2"
(102mm x 178mm x 51mm)
Activity Tracker Dimensions: 2" diameter x ¾"
(51mm x 19mm)
Hub Ingress Protection Rating: IP66
Tracker Ingress Protection Rating: IP67
Chemical Exposure Resistance: Short term exposure
to gasoline, diesel fuel, motor oil, and other common
construction chemicals
Shock Resistance: Resistant to vibration or sudden shock
UV Resistance: Resistant to UV exposure
Power Supply: 12VDC or split 24VDC, auxiliary solar panel,
or an AC Adapter (110 volts)
Upload Frequency: 8 minutes
Orientation Sensitivity: TBD
Movement Sensitivity: TBD
Range: TBD
Hub Backup Battery: 6 Hours
Rooster
®
Hub Product Life: 5 years
Activity Tracker Product Life: 24 months
Vehicle Battery Rundown Resistance:
Rooster
®
Hubs
feature low battery/low voltage detection to prevent
battery run down of the host vehicle/equipment
Cellular Network: AT&T cellular network in North America,
and the Vodafone cellular network in Europe. Users Do
Not need to have an account with AT&T or Vodafone.
Secure Communication:
Rooster
®
Hubs and Activity
Trackers communicate only with devices that are part
of the
Rooster
®
system.
!

Summary of content (2 pages)