Installation Instructions
4
5.Connect Power Supply
Finally, the power is turned on, if your mobile phone signal
has been enhanced, Congratulaons, you succeed. If you are
not very sasfied with the intensity, then adjust the angle of
the outdoor antenna unl you feel the cell phone signal is
sasfied.
*WARNING:
1.The booster is designed for use in indoor ONLY.
2.Do NOT cover the booster body with anything. This prevents if
from cooling down. If the product becomes overheated, it
will automacally shut off or cause permanent damage.
3.Use only the power supply provided by Room boost. Any other
non-approved products by Room boost of self-made power
cables may damage the booster.
4.Unauthorized antennas, cables, and/or coupling devices are prohibited
by FCC regulaons. Please contact FCC for details: 1-888-CALL-FCC.
This is a CONSUMER device
BEFORE USE MUST REGISTER THIS DEVICE, you with your wireless provider and have your provider' s consent .Most
wireless provider consent to the use of signal boosters .Some providers may not consent to the use of this device on their
network .If you are unsure ,contact your provider.
You operate this device with approved antenna and cables as specified by the manufacturer .Antennas be MUST MUST
installed at least 20cm (8inches) from any person.
You cease operating this device immediately if requested by the FCC or a licensed wireless service provider.MUST
E911 location information may not be provided or may be inaccurate for calls served by using this device.WARNING.
This device may be operated in a fixed location for in-building use.ONLY