Installation & Assembly

How to Apply Wall Decals
Step 1 Step 2
Step 3
Whether this is your first me applying wall decals or you've done it before, applicaon is meant to
be simple. Always remember, just peel and sck! Your wall scker sheets may also include numbers
(depending on the complexity of the design) next to each cut out wall decal to help guide you to
build your decal and know which scker to place on the wall first, second, third and so on. Follow
our guide below as we walk you through the steps of how to apply wall decals.
Aer your wall decal has been applied to the wall, you can remove, reposion, reusable, and add to
a completely other wall. The best part is, no scky residue will be le behind on the wall and the
quality of the wall decal will stay just as strong!
Your RoomMates wall decals will
arrive printed on one or more sheets
and packaged in a protecve plasc
shell. Open the packaging and
remove the sheets. Spread them out
on a flat surface near your desired
locaon of applicaon.
Step 4
Examine the placement of your wall
decal. If the applied element needs
to be moved, simply peel it away
from the wall and re-apply. The
decal will remove and re-apply
easily regardless of how many mes
this process is repeated.
Step 5
Repeat steps 2-4 unl you have
applied all included wall decals, or (if
you are assembling a large design
from mulple pieces) completed the
applicaon of your giant wall decal.
Step 6
If you need to move your decals,
simply peel them away from the wall
and place them back on their liners
(or wax paper). Roll up the sheets
and store them somewhere safe
unl they are needed again.
Peel the first decal from the sheet. It
should remove easily from the liner.
If handling a large design, consider
recruing a second person to hold
the opposite end of your decal so
that the two sides do not sck
together.
Bring the decal to the wall. Slowly
smooth the design from top to
boom, pressing down firmly.
Ensure that the enre decal makes
contact with the wall or surface, and
that no air bubbles are trapped
beneath the scker.