Assembly Instruction

800.301.9720 | roomandboard.com

4/1/11

assembly instructions: moda changing tray

List of parts

1 – changing tray

Hardware

2 – angle brackets

4 – wood screws

Tools needed

Philips screwdriver

Dresser mount

Taped to the plastic bag on the mattress pad, there is a bag with two angle brackets and four

wood screws (see Figure 1). Attach the angle brackets to the underside of the changing tray

using the pilot holes already drilled there. Tighten the screws completely. Then place the

changing tray on top of the dresser, and use the other two screws to secure the bottom of the

bracket into the BACK of any dresser (see Figure 2).

Crib mount

On the underside of the changing tray are velcro straps that secure the tray to the top rails of

the crib sides, as pictured below (see Figure 3).

Care and cleaning instructions

Your changing tray will provide many years of reliable use if treated with the care normally given

to ﬁne furniture. It has been carefully ﬁnished with a durable, non-toxic ﬁnish. The foam pad can

be wiped with a damp cloth and mild detergent.

changing tray

MADE IN New York

MADE IN

New York

PAGE 1
assembly instructions: moda changing tray changing tray List of parts Dresser mount 1 – changing tray Taped to the plastic bag on the mattress pad, there is a bag with two angle brackets and four Hardware wood screws (see Figure 1). Attach the angle brackets to the underside of the changing tray using the pilot holes already drilled there. Tighten the screws completely.
PAGE 2
assembly instructions: moda changing tray Figure 1 Figure 2 – Dresser Mount Attach using brackets and screws. Figure 3 – Crib Mount Attach using velcro straps. SAFETY WARNINGS • The safety strap is only intended to HELP hold an infant while using the changing tray. • NEVER LEAVE CHILD UNATTENDED on changing tray. • Periodically check that all bolts and screws are securely tightened to ensure stability and safety of changing tray. • DO NOT ALLOW CHILDREN TO CLIMB on changing tray. 800.301.