Assembly Instruction

ManualsBrandsRoom & Board ManualsOther RoomsRoom & Board Moda Bed and Bunk

CRIB ASSEMBLY INSTRUCTIONS

for Nest Crib

PARTS INCLUDED IN CARTON

2 – HEADBOADS 2 – SIDES 1 – MATTRESS SUPPORT SPRING

PARTS INCLUDED IN HARDWARE BAG

8 – DECORATIVE BOLTS 8 – LOCK WASHERS 4 – HEX BOLTS

1 – HEX WRENCH 1 – ALLEN WRENCH

Summary of content (4 pages)

PAGE 1
CRIB ASSEMBLY INSTRUCTIONS for Nest Crib PARTS INCLUDED IN CARTON 2 – HEADBOADS 2 – SIDES 1 – MATTRESS SUPPORT SPRING PARTS INCLUDED IN HARDWARE BAG 8 – DECORATIVE BOLTS 1 – HEX WRENCH 8 – LOCK WASHERS 4 – HEX BOLTS 1 – ALLEN WRENCH
PAGE 2
WARNING: CRIB ASSEMBLY INSTRUCTIONS THESE W ARNINGS AND ASSEM BLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. For Nest Crib • READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR FUTURE USE. WARNING : INFANTS CAN SUFFOCATE ON SOFT BEDDING. NEVER ADD A PILLOW, COMFORTER OR PADDING. • TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACKS TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN.
PAGE 3
CRIB ASSEMBLY INSTRUCTIONS for Nest Crib DO NOT USE POWER TOOLS! STEP 1: Mount one Side to the rear posts of the Headboards. Use four Decorative Bolts and Lock Washers to fasten the side to the posts. DO NOT tighten the bolts completely yet. STEP 2: Install the Mattress Support Spring in the crib with the flat side up. Extend the mounting flange on each corner and attach the spring to headboard and footboard at the desired level using four Hex Bolts and Hex Wrench provided.
PAGE 4
NEST CRIB ASSEMBLY INSTRUCTIONS BOLT + WASHER BOLT + WASHER BOLT + WASHER BOLT + WASHER CRIB - STEP 1 BOLT + WASHER CRIB - STEP 2 BOLT + WASHER BOLT + WASHER BOLT + WASHER BOLT + WASHER BOLT + WASHER CRIB - STEP 3 BOLT + WASHER Toddler Rail (sold separately) (Mattress support spring should be in lowest position; it has been removed from this drawing for clarity.