Assembly Instruction

headboard/footboard

side rail

1. Hold headboard upright near its desired placement.

2.Allowing side rail to rest on ground (tabs down, slat screws up),

lift one end of side rail into headboard interlocking hardware.

3. Push down on siderail to insure it interlocks.

4. Use rubber mallet to pount into place, insuring tight fit.

5.Attach footboard in same manner as headboard.

Sherwood Bed Assembly Instructions

List of parts: 1 - headboard

1 - footboard

2 - side rails

12 - slats

Hardware: 4 -

/2" self-tapping sheet metal screws

Tools needed: Phillips screwdriver

rubber mallet or hammer

Directions:

footboard

headboard

12/18/07