User Manual

Take control of your wind.

If you have a numeric dial setting on your watch winder please see the steps below

for program details and control settings.

* Mode 1 - Operation On/Off

* Mode 2 - Turn clockwise*

* Mode 3 - Turn counter clockwise*

* Mode 4 - Turn both clockwise and counter clockwise**

* Mode 5 - Turn both clockwise and counter clockwise ***

If you have an arrow dial setting on your watch winder please see the steps below for

details and control settings.

* Mode - Operation On/Off

* Mode 1 - Turn clockwise*

* Mode 2 - Turn counter clockwise*

* Mode 3 - Turn both clockwise and counter clockwise**

* Mode 4 - Turn both clockwise and counter clockwise***

* Rotate for 2 minutes and rest for 6 minutes and then repeat.

** Rotate for 2 minutes in one direction and rest for 6 minutes. Rotate for 2 minutes

in the opposite direction and then rest for 6 minutes. Repeats above cycle.

*** Rotate for 5 minutes in one direction and then rotates in opposite direction in

same 5 minutes. Repeats continuously for 3 hours and then rest for 9 hours. After the

9th hour, it will begin rotating the above cycle again

OFF