W AT C H W I N D E R S USER MANUAL
Thank you for choosing ROOGS. We proudly engineer our automatic watch winders for all collectors and watch enthusiasts worldwide. Quality shouldn’t cost a fortune and at ROOGS we design premium watch accessories that last a lifetime. circular patterns emulate the movement of human motion to operate the self-winding mechanism or your automatic watch. When your watch is not worn, simply place your automatic watch in your watch winder to ensure your watch remains wound and in perfect condition.
Take control of your wind. If you have a numeric dial setting on your watch winder please see the steps below for program details and control settings. * Mode 1 - Operation On/Off * Mode 2 - Turn clockwise* * Mode 3 - Turn counter clockwise* 3 4 * Mode 4 - Turn both clockwise and counter clockwise** * Mode 5 - Turn both clockwise and counter clockwise *** 2 If you have an arrow dial setting on your watch winder please see the steps below for 1 details and control settings.
Winders with TPD settings. If you have a numeric dial with TPD settings on your watch winder please see the steps below for program details and control settings. * Mode 1 - Operation On/Off * Mode 2 - Turn clockwise. * Mode 3 - Turn counter clockwise. * Mode 4 - Turn both clockwise and counter clockwise. TPD settings: * TPD: Turns per day. Works 12 hours a day, stops 12 hours. * 650 TPD, rotate for 1 minute and rest for 571 seconds and then repeat.
LCD controlled watch winders. If you have a LCD control screen on your watch winder please see the steps below for program details and control settings. * Mode 1 - Operation On/Off * Mode 2 - Turn clockwise * Mode 3 - Turn counter clockwise * Mode 4 - Turn both clockwise and counter clockwise To adjust the time hold the start/stop button, with motor selection buttons you can adjust the time. Simply press start/stop again to confirm.
Winders with door functionality. Some Roogs watch winders have door sensor power swtich to provide seamless functionality with the door, LED lighting and rotors. When the sensor is turned on: * When opening your Watch Winder the rotors will automatically stop and continue once closed. Please note some models also include a lighting on/off switch. * Not all models include this feature, please contact us if you have questions - info@ roogs..
Please be advised. Please Note: 1.The watch winding mode (the winding direction and the TPD setting) depends on the watch model. Please check which model or dial your winder has or contact us for more detailed information. 2. If your watch is designed to be wound manually, you cannot use a watch winder to wind it . 3. The winding controller splits the programmed number of turns per day into 24 hours evenly. The rotors do not rotate continuously and stay motioness for most of the time. Safety Warnings: 1.
Built to last a lifetime. We proudly offer a two year warranty against all manufacturing errors and defects. Every ROOGS watch winder is built to last. with a 2 year global warranty. In general, defects are covered by manufacturer’s warranty that are the result of improper manufacture. Warranty is not offered against defects resulting from actions or conditions unrelated to improper manufacturing.
W AT C H W I N D E R S USER MANUAL
