Product Manual A

13. Store all parts of the TranzSporter Hoist in such a fashion as not to damage any of the components.

14. Do not operate indoors or in an area with poor ventilation. Electric motor model is excluded.

15. Never lift sheet or panel goods without the use of the plywood brackets and the tie down straps provided

(See page 17).

General Safety Instructions (Continued):

Step 1

If you have not already assembled the carriage assembly,

Stop Now. You must ﬁrst assemble the carriage,

follow the assembly instructions included in the #2 Box -

“Collapsible Carriage & Plywood Attachments”.

Remove

3/8” Keeper

Nuts

Assembly Instructions for the TP250 Hoist

Instructions for the TP400 Hoist skip to page 8

Step 2

Remove base section from its box and place on a

clean ﬂoor or assembly area. Remove the top cap

with a 7/16” wrench (one bolt/nut on each side).

Step 3

Starting at the top of the track section slide carriage

assembly onto track section so that the four rollers

connect to the top rail of the track section.

TP250 Assembly Instructions