Product Manual A

16
Plywood/Flat Panel Tie Down and Lifting Instructions
• Use the proper tie down equipment - If you are not securing your
cargo with the proper safety straps, it could come loose during
lifting, resulting in injury or death.
• Never hoist anything wider than the 8” - larger plywood sheets
can make controlling your hoist difficult and dangerous,
especially when considering windy conditions. Wide panels
must be centered to prevent tipping.
• Attach your safety straps to slotted tie-down points - Do not
hook your tie-down straps to the plywood, straps must pass over
the top. Secure your safety straps to the carriage top flaps slot
ted holes (the metal frame) and to the plywood brackets only
(Refer to the drawings for tie down slot locations).
• Maintain a manageable speed - The wind’s effects on sheets of
plywood or panel goods, as well as the higher center of gravity,
can make hoisting difficult and dangerous.
• Check all tie-down connections. Safety straps may come loose
during transport. Always check strap for damage or wear. Re
place when damaged or worn.
Plywood Bracket
Tie Downs -
Secure straps through
slotted holes provided.
Tie down strap
must loop over
all materials and
must attach at
tie down locations.
NOTE:
ALWAYS CENTER FLAT
PANEL LOADS
Platform Back
Flap Tie Down -
Secure straps through
flap slots provided
on back.
WARNING
WARNING
WARNING
FAILURE TO READ AND UNDERSTAND THE OPERATING
INSTRUCTIONS CAN RESULT IN PROPERTY DAMAGE,
PERSONAL INJURY OR EVEN DEATH TO USER OR OTHERS
Tie Down Strap Slots
Tie Down Strap Slots
Plywood Bracket
Tie Downs -
Secure straps through
slotted holes provided.
Tie down strap
must loop over
all materials and
must attach at
tie down locations.
NOTE:
ALWAYS CENTER FLAT
PANEL LOADS
Platform Back
Flap Tie Down -
Secure straps through
flap slots provided
on back.
WARNING
WARNING
WARNING
FAILURE TO READ AND UNDERSTAND THE OPERATING
INSTRUCTIONS CAN RESULT IN PROPERTY DAMAGE,
PERSONAL INJURY OR EVEN DEATH TO USER OR OTHERS
Plywood Bracket
Tie Downs -
Secure straps through
slotted holes provided.
Tie down strap
must loop over
all materials and
must attach at
tie down locations.
NOTE:
ALWAYS CENTER FLAT
PANEL LOADS
Platform Back
Flap Tie Down -
Secure straps through
flap slots provided
on back.
WARNING
WARNING
WARNING
FAILURE TO READ AND UNDERSTAND THE OPERATING
INSTRUCTIONS CAN RESULT IN PROPERTY DAMAGE,
PERSONAL INJURY OR EVEN DEATH TO USER OR OTHERS
Rolled Goods and Plywood Attachment
90˚
Replace
Safety Pin