Owners manual

Close carrier
1. Flip up corners of flap to facilitate closing
the zipper.
2. Close zipper on all three sides. Zipper
pullers should meet at the back. Leave no
gap between pullers to avoid water entry.
3. Flip down flap corners.
4. Zipper flap should point downward along
its entire length (sides and rear of the car-
rier), to avoid water entry.
Fill carrier
1. Fill carrier as full as possible.
2. Place more bulky items at the rear to
preserve the bag’s aerodynamic shape.
3. Cushion hard or sharp objects with tow-
els or blankets to avoid abrasion damage
to the carrier fabric.
4. Distribute heavy items evenly inside car-
rier to avoid denting the roof.
Prepare carrier
1. Place carrier on a clean roof and
(preferably) on a Protective Mat (sold
separately).
2. Logo should face the back of the car.
3. Front of carrier should be at least 8
inches behind front edge of roof.
4. Flip up the corners of the zipper flap and
open zipper on all three sides.
5. Open carrier completely like a clamshell
and fill carrier while on top of the car.
OVERVIEW
Page 2