Product Brochure

ROOFAQUAGUARD MT-HT
TECHNICAL DATA PROPERTY TEST METHOD TYPICAL VALUE
Roll Dimensions 36 in x 66.8 ft
Roll Weight 65 lb
Roll Size 200 sq.ft
Color Light Green
Top Surface Synthetic - Polyester Fabric
Reinforcement layer Polyester
Release liner Silicone based, split release film
Adhesive Bitumen SBS Peel & Stick
Permeability ASTM E96-00 TBD
Nominal Thickness ASTM D5147 60 mil
Nail sealability ASTM D1970 Pass - Self Sealing Around Nails
Tear Strength lbf ASTM D4073/1970 MD 86, CMD 45
Elongation at break %, min ASTM D2523 30%
Low temperature flexibility ASTM D1970 (-20 F); pass
Adhesion to plywood 75F+/- 2F (lbf/ft) ASTM D903/D1970 30 lb
Load break (lbf/in) ASTM D2523/D1970 MD 80, CMD 40
Installation Temp.range (min & max) 45°
F - 250° F
Approved also for Polyurathane Foam Adhesive
Tile Roof Loads No Degradation of waterproofing properties
Conforms to AC 48
Exposure time w/o covering 90 Days
Manufacturer’s Limited Warranty 35 Years, for metal and tile
Shipping specifications
Approvals
Approvals
Approvals
24 rolls/pallet 37 pallets/40’ container
ICC ESR # Pending
Miami Dade NOA # 11-0526.01
FL # Pending
Approvals
UL # R27132
ROOFAQUAGUARD LIMITED WARRANTY
L
I
M
I
T
E
D
W
A
R
R
A
N
T
Y
35
YEAR
Nordic Waterproof ing Inc. (“Manufacturer”) warrants to the buyer (“Buyer”) of the Manufacturer’s synthetic roofing underlay-
ment product (“Product”) that the Product will not prematurely deteriorate to the point of failure because of weathering for a
period of 35 years from the sales invoice date (“Warranty Period”) only if installed in a workmanlike manner strictly in accor-
dance with and for the purpose stated in Manufacturer’s installation instructions.
This warranty does not cover leaks or damage caused by any penetrations (including penetrations by fasteners or objects
placed on the roof), or by animals, vandalism, fire, abusive conditions, inadequate or faulty structural design, structural
defects, building alterations, natural forces such as tornados, hurricanes, earthquakes, other acts of nature, or any other cause
beyond Manufacturer’s control. This warranty covers the Product material only. Flashings, adhesives and other accessories
used in the roofing system are not covered by this warranty. This warranty does not cover any costs or expenses associated
with testing, repair, removal, or replacement of the Product.
To make a warranty claim, Buyer must, within 15 days from the date that the claimed defect in the Product was discovered:
(1) Give Manufacturer written notice of the defect including, without limitation, detailed descriptions of how the Product was
used, the defect and how and when the defect was discovered; (2) Deliver to Manufacturer field samples or digital pictures of
the Product legibly showing the Product production codes and digital pictures showing the defect. To be effective, any such
notice, samples and pictures must be sent by registered or certified mail to Manufacturer addressed as follows:
Nordic Waterproof ing Inc.
c/o Nemco Industries Inc.
4655 Caulfeild Dr
West Vancouver, BC V7W 1E9
Canada
Manufacturer shall, at its sole option, and as Buyer’s sole remedy, either, repair, refund the purchase price of, or provide
replacement for, that portion of the Product which has been proven to be defective in a manner covered by this warranty. The
value of these remedies shall be determined solely by the Manufacturer based upon the current prices for the Product
prorated by the number of remaining months of the unexpired Warranty Period. The maximum pro-rated value for repair or
refund shall not exceed the original Product purchase price. Any such replacement or refund shall constitute the limit of
Manufacturer’s liability or obligation for any defective Product. Buyer shall pay all handling and transport costs in connection
with any warranty claim.
This warranty shall become void if any person not expressly authorized by Manufacturer performs any repairs or alterations
within the Warranty Period or if Buyer fails to give notice of defect within the time and in the manner described above.
The warranty set forth herein is Manufacturer’s sole and exclusive warranty for the Product. This warranty shall be the Buyer’s
exclusive remedy for any use of the Product against Manufacturer or its distributors or sales representatives. No representa-
tive of the manufacturer has authority to give any warranties except as stated herein. THERE ARE NO WARRANTIES EITHER
EXPRESSED OR IMPLIED, EITHER AT COMMON LAW OR BY STATUTE INCLUDING WITHOUT LIMITATION THE IMPLIED WARRAN-
TIES UNDER THE SALE OF GOODS ACT [RSBC 1996] C.410, AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, WHICH MODIFY THE WARRANTY CONTAINED IN THIS DOCUMENT. MANUFACTURER SHALL NOT
BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES ARISING FROM THE USE OF THE PRODUCT, INCLUD-
ING BUT NOT LIMITED TO, LOSS OF PROFITS, DAMAGES TO THE STRUCTURE OR ITS CONTENTS, PERSONAL INJURY OR PUNI-
TIVE DAMAGES, BASED ON ANY THEORY OF LAW WHATSOEVER.
No modification of this warranty or waiver of its terms shall be binding on either party unless approved in writing by an autho-
rized representative of the party. This warranty may not be modified by any course of dealing or performance, trade usage or
failure to enforce any term of this warranty. Buyer may not assign or permit any other transfer of this warranty without
Manufacturer’s written consent. If any of the terms contained herein are unenforceable, such term shall be limited only to the
extent necessary to make it enforceable, and all other terms shall remain in full force and effect. No action for breach of this
warranty may be commenced more than one year after the accrual of the cause of action. This warranty is the complete, final
and exclusive agreement of the parties with respect to the quality or performance of the Product and any and all warranties
for the Product. All legal aspects of this warranty including, without limitation, its interpretation, the rights and duties of the
parties under this warranty and conflict of laws shall be governed by and construed in accordance with the laws of British
Columbia, Canada, and the parties submit and attorn to the jurisdiction of the courts of the province of British Columbia.
High Performance Building Products High Performance Building Products
4-LAYER CONSTRUCTION
POLYESTER
FIBER-GRIP
FIBERGLASS
WEAVE
MODIFIED
SBS BITUMEN
SILICONE
RELIEF LINER