Install Manual

Grounding

③ Use Grounding lug to fix grounding wire.

④ Go back to P.15

(2) Grounding Setup

All electrical installation and procedures should be conducted by skilled,

licensed and bonded electricians. Installer is responsible for and shall

provide an appropriate method of direct-to-earth grounding in accordance

with the latest edition of the Canadian Electrical Code Part 1, CSA 22.1

Safety Standard for Electrical Installations or the National Building Code,

including NEC 250: Grounding and Bonding, and NEC 690: Solar

Photovoltaic Systems.

Please refer to your local Building and Electrical Codes.

Note: Grounding, Bonding Lugs and Straps are not provided by Roof Tech Inc.

We recommend the use of Ilsco or Burndy GBL-4DBT Grounding lug with a

minimum 10 AWG solid copper grounding conductor.

① GBL-4DBT

■Ground Wire

■Lug