Install Manual

Installation

③ Once all the wires are installed, the

entry hole shall be filled with the sealing

putty. The sealing putty will prevent all

moisture and dust from getting inside

of the roof.

Sealing putty can be installed in 3 steps.

(1) Fill the sealing putty from the ridge side of the hole.

(2) Fill the edge side and under the wires.

(3) Place the rest of the putty on top of the wires to cover.

※To make the best waterproof, Sealing putty shall be installed between the wires.

Point

■Sealing putty