Install Manual

Installation
9
⑤ Tape the butyl tape around the entry
hole on roof. The butyl tape must expose
3/8 inch (10mm) above the roof surface.
The butyl tape adheres to the inside of
the hole.
⑥ Overlap 1/8 inch (3mm) and cut off
the extra butyl tape.
⑦ Make a cut in 4 location as it is shown.
Please make sure there is no space or gaps
between butyl tape and the adhering
surface.
Cut the tape at 90 degrees intervals.
Attention
!
■Butyl with Protective
paper (Inside)
■Butyl tape for roof entry
■Cut off the extra part of butyl tape
■Tape shall be started to install from
right corner. And over wrap 1/8 inch.
■Butyl tape for roof entry hole