Install Manual

Safety

Installation Safety

The installation process requires working on sloped and elevated building surfaces,

in outdoor weather conditions, using tools and heavy components designed for the

generation of electricity.

・ Use properly anchored fall protection equipment.

・ Use caution to prevent objects from falling or dropping off the roof area.

・ Cordon off ground areas directly beneath the roof work area when possible.

・ Always use personal protection equipment such as safety glasses, gloves, etc.

・ Do not perform installation in excessively wet, windy, or inclement weather

conditions.

・ When working in hot weather, work crews should take care to prevent symptoms

of over-heating or dehydration.

・ Use proper lifting and carrying techniques when handling heavy components at the

job site. If conditions are challenging for moving PV modules to the roof area, use

a mechanical lift.

・ Follow best practices when working around high-voltage electrical equipment.

・ Do not anchor fall protection equipment to roof mounts, or any other inappropriate

roof structure.