Install Manual

ADDENDUM

Installation Instruction for Classic rib metal roofing

2. Marking on the Roof

(1) Layout

① The MINI base must be

mounted on the flat surface.

Please make sure the

location is not on slope

surface of metal ribs.

② In case of Deck Installation,

mark at ± 15 mm, ± 25

mm from the intersection of

the M Line and Y Line.

③ Then mark at ± 32.5 mm

from the M Line

④ Mark at ＋35 mm from the

Y Line on the M Line.

[Fastening to the Deck]

Note; Marking spot is not symmetric when MINI base is

installed on deck. You may want to have an extra MINI to

assist in marking to a metal roof. (Create a MINI JIG by

removing the RT Butyl from it.)

Attention