Install Manual
ADDENDUM
Installation Instruction for Metal Roofing
19
2. Marking on the Roof
(1) Layout
① Mark at ±35 mm from the
intersection of the M Line
and Y Line on the M Line.
(See illustrations.)
② In case of Deck Installation,
mark at ±15 mm, ±25 mm
from the intersection of the M
Line and Y Line.
③ Then mark at ± 32.5 mm
from the M Line
④ Mark at +35 mm from the Y
Line on the M Line.
[Fastening to the Rafter]
[Fastening to the Deck]
Note; Marking spot is not symmetric when MINI base is
installed on deck. You may want to have an extra MINI to
assist in marking to a metal roof. (Create a MINI JIG by
removing the RT Butyl from it.)
Attention
!