Install Manual

Bracket Installation
15
⑤ Installing the bracket.
Place the brackets at the
specified position and make
sure the RT butyl makes
good contact with the
roofing surface.
Slide the M8 or 5/16” Hex
bolt into place before
fastening the bracket on the
roof.
Set the bracket with 2 ea.
Screws, M 5.0 × 60 mm
stainless wood screw using 8
mm hex socket.
After completing process,
make sure the brackets are
securely fixed.
The 5/16” or M8 Hex bolt
must be set on the lower
channel before both wood
screws are fixed to the rafter.
Attention
!
[Fastening it to the Rafter]