Install Manual

Bracket Installation
10
② Adjust the RT butyl tape to
match the height of the upper
shingle. When there is a gap, a
slit, or a height difference at
the mounting location of the
bracket, use additional RT
butyl tape.
● When there is a slit at the
installation spot, fill in with
the additional RT butyl tape.
The slit must be filled with RT
butyl tape.
● When there is a slit above the
bracket, fill it in with RT butyl
tape to match its shape. Apply
roof sealant around the RT
butyl tape.
Notice that the roof sealant is
only used to add a protective
layer to the RT butyl tape.