Install Manual

ADDENDUM
Installation Instruction for metal roofing
76
④ Set the bracket with 5 ea. (for
Roof DECK), of M5.0×60 mm
stainless wood screw using 8
mm hex socket. After
completing process, make sure
the brackets are securely fixed.
When the base is installed on the
deck, 5 screws must be used. The
screws are fixed into the side 4 holes
and 1 ridge side hole.
Note; Each base is shipped with 2
mounting screws. The installer must
purchase additional screws when
mounting it to the roof deck.
Attention
!