Install Manual

Electrical Setup

Example of Bonding Path ①

In order to properly ground the PV modules and the brackets to the equipment

ground, a grounding lug or lay-in lug must be attached to the PV module or the

RT-APEX’s U-D Bracket at the end of each row. When the skirt is bonding the

adjacent rows, there is no need to attach the grounding lug at the end of each

row (see examples 2 and 3) Notice that the PV frame is part of the bonding

path.

Note: Grounding, Bonding lugs and Straps are not provided by Roof Tech Inc.

(See Page 10)