Install Manual

Eaves Cover Installation
38
4. Skirt Bonding Splice: Eaves Cover Joint (Optional)
① Slide in Skirt Bonding Splice
to the edge of Eaves Cover.
Skirt Bonding Splice has a
tooth which shall be face down
to bottom. Please slide in the
Skirt Bonding Splice until the
teeth scratches the side wall.
You may use rubber mallet to
install it.
② There is a 3mm gap
between each Skirt, and
the teeth create this 3mm
gap once installed
correctly.
Make sure the teeth facing down
to bottom of Skirt.
Attentio
n
!