Install Manual

Eaves Cover Installation
36
3. Eaves Cover: Skirt (Optional)
(1) Install the first row
① After alignment of the first row, put in Eaves cover to U-D Bracket.
Note: Eaves cover; Skirt must
fit in the channel where
Bonding clip is installed
at U-D bracket as it
shown on picture.
Skirt is not recommended in areas where the ground snow exceeds 40 PSF.
The Skirt when installed across 2 adjacent rows of PV modules will create
a bonding path that can replace bonding lugs. (Details on Part E)
Attention
!