Install Manual

LANDSCAPE
PANEL INSTALLATION
35
④ Tighten the head cap screw
M10 to 142 in-lbs (16 N ･ m)
torque or 159 in-lbs (18N･m)
torque (see appendix for the
proper torque value).
⑤ If necessary, level the height of
the brackets using Hex wrench
bit socket (8 mm).
Adjusting height shall be done
within the range from bottom
where the Pillar hits the clamp,
to the top where the pillar is
flush to the top of U-D bracket.
Adjustable height is up to 1”
(30mm frame), 1 3/8” (40mm
frame).
Max height line